View IA2004-CE50A_4127022.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IA2004-CE50A
Contact image sensor heads
Image sensor heads for narrow-width scanners
IA2004-CE50A
These image sensor heads feature high-speed scanning (1000mm/s) and are compatible with A6 size media. They are center connector type units with no frame protrusion, simplifying assembly.
Applications Check readers, card scanners, and a variety of other image input devices.
Features 1) Signal amplifier integrated into each sensor IC in order to eliminate external noise ; compatible with 3.3V interface. 2) LED light source mounted on the same substrate as the sensor chip itself, resulting in a more compact, lightweight package. 3) Utilizes proprietary prism for improved lighting efficiency. 4) Ceramic substrate used, ensuring excellent dimensional and thermal stability.
Dimensions (Unit : mm)
124.00.3
5.50.5
109.6(Effective Reading Width:107.8)
8.00.5
5.60.2
20.2
Paper Feed Direction
2x2-2.2 (Depth 5)
18.00.4
No.8 Pixel
140.2
10.50.4 600.3 A 620.3 320.3
No.12 (NOTE 1) Deflection at the top of glass:0-0.25 Projection to platen is positive. (NOTE 2)
No.1 Pin No. No.1 No.2 No.3 No.4 No.5 No.6 Signal AO GND VDD NC GND SP Pin No. No.7 No.8 No.9 No.10 No.11 No.12 Signal GND CLK VLED GLED RLED BLED
Socket Housing:IL-Z-12S-S125C3(JAE) Socket Contact:IL-Z-C3-A-15000(JAE)
MAX1.5
MAX2
15.51 251
1/4
IA2004-CE50A
Contact image sensor heads
Characteristics
Parameter Effective scanning width Primary scan dot density Total dot number Power supply voltage Scanning speed Clock frequency Maximum dynamic range Minimum dynamic range Dark output Operating temperature Symbol
- - -
Typ. 107.8 200 864 5 0.125x3 8 0.5 0.25 1.20.2 5 to 45
Unit mm dpi dots V ms / line MHz V V V C
VDD SLT CLK VRMax. VRMin. Vod
-
Analog signals are produced output at double rate of clock frequency.
Pin assignments
No. 1 2 3 4 5 6 7 8 9 10 11 12 Circuit Ao GND VDD NC GND SP GND CLK VLED GLED RLED BLED I/O O I I - I I I I I I I I Functions Analog Output Ground Power Supply Non connect Ground Start pulse Ground Clock LED power supply LED ground LED ground LED ground
2/4
IA2004-CE50A
Contact image sensor heads
Timing chart (a) CLK Timing Chart
1/fCLK twCLK twCLK
50%
50%
50%
CLK
ts 50% tSETUP tHOLD 50%
SP
Ao
1pixel 2pixel
(b) Data Output Timing Chart After turning on the SP pulse, the analog output shape starts from the setting up point of 65 clock pulse.
1
2
52
53
54
64
65
66
CLK SP
Ao
VREF Output Period (52pixels) 1 to 52clock
Vdummy 53 to 64clock
Analog Output Period 1 to 864pixels
Note) Output blank part cannot be used as the analog output standard level.
3/4
IA2004-CE50A
Contact image sensor heads
Equivalent circuit
VDD
1F x 2
GND SP
ANALOG MEMORY CIRCUIT 1 864 1F
200
VDD
75
CLK
Vout
VREF
1F
VLED
RGND GGND BGND
Peripheral circuit
12
10
11
9
1
3
6
8
C5
257
R2 C1
B G R VDD
R1
C3
C2 SP
CLK
C4
LED GND VLED A GND
R1=R2=100 C1=47F C3=100F, C4=0.1F, C5=100pF
Please adjust the value of resistance to fit your interface circuit.
4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright (c) 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121 FAX : +81-75-315-0172
Appendix1-Rev2.0

▲Up To Search▲

Price & Availability of IA2004-CE50A

	To Download IA2004-CE50A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .